License status box, Identity window, Identity – HP StorageWorks XP Remote Web Console Software User Manual
Page 60
License Install has the following features:
•
Mode allows you to select one of the following buttons: the Key Code button, the File button,
or the Available button.
◦
Key Code enables the Key Code text box, which allows you to enter the license key for
the selected option to be installed (see
“Enabling Options Using a License Key Code”
).
NOTE:
You cannot copy and paste text from other applications.
◦
File enables the File Name text box and the Browse button, which allow you to enter the
name of the desired license key file (see
“Enabling Options Using a License Key File”
). When you select the Browse button, the dialog box to select the license key
file is displayed. As you select the desired license key file on the displayed dialog box,
you can enter the license key file name in the File Name text box.
◦
Available enables you to install available options automatically. The Available button can
be used only when the licensed capacity exceeds the mounted (or used) capacity because
the disk drives are reduced, or because the pairs are deleted by a program product such
as TrueCopy for Mainframe.
License Status Box
License Status is on the bottom right of the License Key window.
You can set the license to enable or disable for each program product option listed in the license
key list. If you select a program product option from the license key list, select one of the following
options, and then click Set, you can set the option to enable or disable.
•
Enable: You can use the program product option.
If you set an option to Enable with the term key, the available days of the term key decrease
by one day. When the setting is applied, Installed is displayed.
•
Disable: You cannot use the program product option.
If you set an option to Disable with the term key, the available days of term key will not
decrease. When the setting is applied, Installed (Disable) is displayed.
Identity Window
The Identity window displays information on the connected storage system.
To open the Identity window, log in to the Remote Web Console, and then click Go, Device Status
and Alerts and Information on the menu bar of the Remote Web Console main window. A storage
partition administrator can view the Identity window, but cannot change the information on the
Identity window.
60
Using the Remote Web Console GUI