HP StorageWorks XP Remote Web Console Software - Manual (Page 135)

Continuous Access XP Journal user guide 135
7 Monitoring remote copy operations
Use the Usage Monitor pane to monitor remote copy usage for the connected local array. The usage
monitoring function collects I/O statistics for all volumes on the connected array.
Displaying the Usage Monitor pane
The Usage Monitor pane ( Figure 60 ) displays user-selected remote copy I/O statistics and status of
remote copy usage monitoring, allowing you to monitor remote operations.
NOTE: To use the Usage Monitor pane, ensure that Command View XP or XP Remote Web Console is in
Modify mode. If Command View XP or XP Remote Web Console is in View mode, you can only view
information in this pane, and cannot make any settings in this pane.
If Continuous Access XP Journal has not been started
1. Use your Web browser to display the storage device list. In the storage device list, select the array to
log into. Enter a user name and password, and click OK. The Command View XP or XP Remote Web
Console main pane appears. For more information, see the HP StorageWorks Command View XP
user guide for XP Disk Arrays or the HP StorageWorks XP Remote Web Console user guide for
XP12000/XP10000/SVS200.
2. On the Command View XP or XP Remote Web Console main pane, click the Continuous Access XP
Journal button ( ). Continuous Access XP Journal starts.
3. Select the Usage Monitor tab. The Usage Monitor pane appears.
If Continuous Access XP Journal has already been started
1. Select the Usage Monitor tab. The Usage Monitor pane appears.
Usage Monitor pane components
Figure 60 Usage Monitor pane
• Monitoring Switch: Usage monitor operation (see ” Starting and stopping usage monitoring ” on
page 136).
• Enable: Monitoring is on.
• Disable: Monitoring is off.