HP StorageWorks XP Remote Web Console Software - Manual (Page 157)

Figure 69 Configuration example for which logical volumes can only be identified by characteristic
Alternate path's behavior when an EVA array is connected
When an EVA array is connected, the alternate path's behavior differs depending on the EVA
array's microcode version.
If the array type is EVA3000/5000, the behavior of the alternate path differs between the EVA
arrays of the microcode version 4.000 or later and the EVA subsystems of the earlier microcode
versions.
To replace the EVA array's microcode, check whether the alternate path's behavior changes as a
result of changing the microcode version. If the alternate path's behavior changes, perform XP
External Storage's Delete LU operation to release the setting for the EVA array volume's mapping
before you actually replace the microcode.
See the EVA array manuals for more information how the alternate path's behavior changes.
System parameter settings for connecting Sun StorEdge 6120/6320
When you connect a Sun StorEdge 6120/6320 as an external array, set the system parameters
of the Sun StorEdge 6120/6320 according to the following table. For the system parameters that
are not in the following table, see the manuals of the Sun StorEdge 6120/6320 and set the
parameters appropriately for the connecting configuration.
Table 27 System parameter settings for connecting Sun StorEdge 6120/6320
Parameter setting Parameter
SUN port host
System parameter settings for connecting Sun StorageTek FlexLine 380
When you connect a Sun StorageTek FlexLine 380 as an external array, set the system parameters
of the Sun StorageTek FlexLine 380 according to the following table. For the system parameters
that are not in the following table, see the manuals of the Sun StorageTek FlexLine 380 and set
the parameters appropriately for the connecting configuration.
Table 28 System parameter settings for connecting Sun StorageTek FlexLine 380
Parameter setting Parameter
Windows Non-clustered (DMP Support) host type
System parameter settings for connecting Sun StorageTek 2540
When you connect a Sun StorageTek 2540 as an external array, set the system parameters of the
Sun StorageTek 2540 according to the following table. For the system parameters that are not in
Connecting EVA arrays 157