Figure 19 setting the async options, Figure 20 adding the consistency groups, 19 setting the async options – HP StorageWorks XP Remote Web Console Software User Manual
Page 55: 20 adding the consistency groups, Combining truecopy, With other data management operations
55
6.
If you plan to create TC390A pairs with M-VOLs in this MCU, configure the MCU async options as
shown in the following figure. For additional instructions, see ”
Figure 19
Setting the Async options
Then register the consistency group(s) to the MCU as shown in the following figure. For additional
instructions, see ”
Adding Consistency Groups (Add CT Group)
Figure 20
Adding the consistency groups
7.
When you are finished configuring this MCU, exit the TrueCopy main window and close Command
View XP or XP Remote Web Console.
8.
for each disk array that will function as a TC390 MCU. After you have
configured the MCUs, registered the RCUs, and configured the TC390 Async options and consistency
groups, you are ready to begin TC390 volume pair operations.
Combining TrueCopy with Other Data Management Operations
TC390 supports concurrent operations with the following data management functions:
•
Virtual LVI/LUN. Virtual LVI/LUN volumes can be assigned to TC390 pairs as long as the R-VOL has the
same or larger capacity than the M-VOL. If you need to perform Virtual LVI/LUN operations on an
existing TC390 M-VOL or R-VOL, you must delete the pair first to return the volume to simplex status.
•
Cache LUN XP. Cache LUN XP volumes can be assigned to TC390 pairs and Cache LUN XP operations
can be performed on TC390 M-VOLs and R-VOLs.