Working with slprs, Figure 5 partition definition pane (slpr selected), 5 partition definition pane (slpr selected) – HP StorageWorks XP Remote Web Console Software User Manual
Page 16
16
XP Disk/Cache Partition for the XP10000/XP12000
4.
Select the CLPR you want to migrate the parity groups to, right-click, and select Paste Parity Group. The
selected parity groups are added to the CLPR’s resource list.
5.
Click Apply.
Working with SLPRs
Figure 5
Partition Definition pane (SLPR selected)
When an SLPR is selected on the Partition Definition pane, the pane displays the following:
•
Tree: Displays SLPRs and CLPRs in the disk array.
•
SLPR resource list: Displays information about the selected SLPR’s resources (CLPRs and ports). If SLPR0
is selected, all resources that have not yet been allocated to SLPRs are displayed.
• No.: Line number.
• Resource Type: Type of SLPR resources: Cache Partition or Port.
• Name: CLPR or port name.
• Properties: CLPR’s capacity and number of parity groups allocated to the specified CLPR.
• Information: Channel adapter name, if the resource type is Port. If the port is available with
Just-in-Time, Just in Time is displayed on the right of the channel adapter name.
• Status: SLPR status. When you change an SLPR, a description of the change appears in this column.
When you click Apply or Cancel, the description is removed.
•
Detail for SLPR: Displays the SLPR’s settings. You can change the SLPR’s settings.
• SLPR Name: Up to 32 alphanumeric characters.
• CU(* in use): CU number in the specified SLPR (00 - 3F). An asterisk (*) indicates the SSID is
registered to the CU. To delete a CU from the specified SLPR and return it to the Available CU list,
select the CU, and click Delete.
• Available CU(* in use): All CU numbers that are not in the specified SLPR. To add a CU to the
specified SLPR, select the CU, and click Add. An asterisk (*) indicates the SSID is registered to the
CU. You can select up to 64 CUs into which the SSIDs are registered or not.
• SLPR: SLPR to the CU belongs to.
• SSID(SLPR): SSID if the SSID is registered into a CU. The SLPR the SSID belongs to appears
between parentheses on the right of the SSID.