HP StorageWorks XP Remote Web Console Software - Manual (Page 83)

Continuous Access XP Journal user guide 83
NOTE: Information on the DKC Operation pane is updated when you do one of the following:
• Select another tab, and reselect the DKC Operation tab.
• Click Refresh ( ) (top right of Command View XP or XP Remote Web Console pane).
• Click Apply.
• Select Modify mode when you are in View mode.
• Open or close the DKC Status pane.
• Click Refresh on the DKC Status pane.
Displaying information about remote arrays
1. Display the DKC Operation pane.
2. In the Switch Display box, select DKC.
The tree and list display remote arrays.
• Tree: Lists remote arrays. The following information appears to the right of the icon.
• Remote array’s controller ID (array family ID).
• Remote array’s serial number.
• Path group ID.
The icon indicates the status of logical paths between the local and remote arrays.
• List: Displays information about remote arrays.
• Controller ID: Remote array’s controller ID. The controller ID is an array’s family ID. The icon
indicates the status of logical paths between the local and remote arrays.
NOTE: The controller ID for an XP12000/XP10000 is 4.
• S/N: Remote array’s five-digit serial number.
• Path Gr. ID: Path group ID.
NOTE: In the current version, the path group ID is set to the default value.
• M-R Path: Channel type of the logical path between the local and remote arrays. This column
always displays Fibre.
• Status: Indicates whether logical paths failed.
• Normal: No failure occurred at the logical paths
• Failed: All logical paths failed
• Warning: Some logical paths failed
• Num of Path: Number of logical paths.
All logical paths are in normal status.
A failure occurred at some logical paths.
All logical paths are in normal status.
A failure occurred at some logical paths.