HP StorageWorks XP Remote Web Console Software - Manual (Page 84)

84 Configuring arrays and logical paths
Displaying information about logical paths
Logical paths are communications paths that connect local array ports and remote array ports.
1. In the Switch Display box, select DKC.
2. Select a remote array from below Subsystem in the tree. The list displays logical paths. Each row in
the list indicates one logical path.
The list displays the following:
• Path Gr. ID: Path group ID. The icon indicates the status of the path.
• M-R Path: Channel type of the logical paths between the local and remote arrays. This column always
displays Fibre.
• Status: Indicates whether the logical path is in normal status.
• Normal: Logical path is in a normal status. No failure occurred at the logical path.
• Failed: Failure occurred at the logical path.
• Port: Local array’s port number.
• Pair-Port: Remote array’s port number.
Displaying information about ports on local arrays
Use the DKC Operation pane to display information about ports on the local array.
1. In the Switch Display box, select Port. The tree displays a list of channel adapters and port attributes.
2. Do one of the following in the tree:
• Select Subsystem. The list displays all ports on the local array.
• Select a channel adapter. The list displays ports on the channel adapter.
• Select a port attribute. The list displays ports that have the selected port attribute.
Figure 38 DKC Operation pane, Port option
The logical path is in a normal status
A failure occurred at the logical path