HP StorageWorks XP Remote Web Console Software - Manual (Page 15)

Table 1 Storage arrays that can be connected as external arrays (continued)
Notes Storage array
SANRISE H1024/H128 subsystem • In XP External Storage panes, the arrays appear as
“1024” and “128”, respectively.
•
Alternate paths are in Multi mode.
SANRISE H512/H48 subsystem • In XP External Storage panes, the arrays appear as
“512” and “48”, respectively.
•
Alternate paths are in Multi mode.
SANRISE H256 subsystem • In XP External Storage panes, the array is a “256”.
•
Alternate paths are in Multi mode.
For specific supported storage arrays, contact your
HP account support representative. IBM Storage Subsystem
For specific supported storage arrays, contact your
HP account support representative. EMC Storage Subsystem
For specific supported storage arrays, contact your
HP account support representative. Fujitsu Storage Subsystem
For specific supported storage arrays, contact your
HP account support representative. NEC Storage Subsystem
CAUTION: For more information about alternate path modes, see “Setting alternate paths for
external LUs” (page 93) .
Contact your HP account support representative for the latest external array and FC switch support
matrix.
XP External Storage requirements
Table 2 XP External Storage requirements
Requirement Item
Required products • XP Command View Advanced Edition Software version
2.0 or later, or Remote Web Console
•
HP XP LUN Configuration and Security Manager (for
setup)
• HP XP RAID Manager version 01.12.06 or later (if HP
XP Business Copy is used)
60 per port Maximum number of connected external disk arrays
1,024 per port Maximum number of external LUs addressable per local
array port
XP External Storage requirements 15