HP StorageWorks XP Remote Web Console Software User Manual
Page 120
1.
If the OS of the host server is MVS, specify the JCL statement in the DDNAME parameter, or
specify the S-VOL device number of the Version 2 pair that you want to delete for the
UNITADDRESS parameter.
2.
Specify SYSNAME of the ASSGN system control statement in the SYSNAME parameter if the
OS of the host server is VSE.
3.
Specify the CU number, LDEV number, and device number of the T-VOL in the TARGETVOL
parameter.
4.
See
and specify any other necessary parameters.
5.
Execute the FLASHCPY WITHDRAW command. See
.
Figure 81 FLASHCPY WITHDRAW Command Description
FLASHCPY WITHDRAW UNIT(X'7000') TARGETVOL(X'00',X'01',7001) MODE(COPY)
NOTE:
When the FLASHCPY WITHDRAW command is executed, all the dataset relationships
existing in the specified volume will be deleted.
The FLASHCPY WITHDRAW command and the applicable combinations are predetermined. If you
specify any other parameter than the predetermined combinations, the FLASHCPY WITHDRAW
command is normally ended without executing any process.
describes the parameters
of the FLASHCPY WITHDRAW command and the applicable combinations.
Table 61 Parameters of FLASHCPY WITHDRAW Command and Applicable Combinations
Background Copying
Parameter
Relationship after
Completion
Executed
MODE
TARGTVOL
DDNAME, SYSNAME,
UNITADDRESS
Maintained when
CHANGERECORDING
= YES
Yes
COPY
T-VOL or some other
volume
S-VOL
Released when
CHANGERECORDING
= NO
Released
No
NOCOPY or not
specified
T-VOL
S-VOL
Maintained when
CHANGERECORDING
= YES
Yes
ALL
T-VOL or some other
volume
S-VOL
Released when
CHANGERECORDING
= NO
Released
No
ALL
S-VOL or some other
volume
T-VOL
The background copying process is executed on the relationship whose copy source exists in the
volume specified as DDNAME, SYSNAME, or UNITADDRESS. In addition, the relationship whose
copy source exists in the volume specified as DDNAME, SYSNAME, or UNITADDRESS will be
released.
Releasing a Version 2 Relationship Using the ANTRQST Macro Command
lists the parameters you can use with the ANTRQST Macro command when you release
Version 2 relationships.
120 Performing Version 2 Operations