HP StorageWorks XP Remote Web Console Software - Manual (Page 45)

Snapshot XP user guide 45
Gray cells indicate LDEV numbers that are already used for other volumes, white cells indicate unused
LDEV numbers, and blue cells indicate LDEV numbers selected for V-VOLs in this pane.
• Select CU No.
CU number.
• Interval
Interval between LDEV numbers to be assigned to newly created V-VOLs. If you select 0, LDEV numbers
are sequential.
NOTE:
• The value you specify as the interval between LDEV numbers counts only available LDEV
numbers and skips those that are not selectable.
• Even when you use multiple CUs, LDEV numbers are assigned according to the setting in the
Interval drop-down list.
• CU number of another SLPR is used.
Used to select the CU numbers of an SLPR other than the SLPR you are now in.
• Back button
Returns to the Create V-VOL wizard pane (1) while maintaining settings in this pane.
• Next button
Fixes the setting in this pane, and displays the Create V-VOL wizard pane (3).
• Cancel button
Cancels the setting in the Create V-VOL wizard pane (2), and closes the pane.
Figure 16 Create V-VOL wizard pane (3)
The Create V-VOL wizard pane (3) displays the following items:
• V-VOL information setting list (middle of pane)
Information about the V-VOLs you are creating.
• VDEV: VDEV number