HP XP Continuous Access Software User Manual
Hp 200 storage virtualization system
HP StorageWorks
XP Continuous Access Journal User Guide
HP XP12000 Disk Array
nl
HP XP10000 Disk Array
nl
HP 200 Storage Virtualization System
Abstract
This document provides information about HP StorageWorks XP Continuous Access Journal on HP XP12000/XP10000 and
SVS 200 storage systems.
HP Part Number: T1778-96022
Published: May 2011
Edition: Fifteenth
This manual is related to the following products:
Table of contents
Document Outline
- XP Continuous Access Journal User Guide
- Contents
- 1 Overview of HP Copy Solutions
- 2 Overview of XP Continuous Access Journal
- Overview of functionality
- Components
- Remote copy operations
- Journal processing
- Journal group operations
- XP Continuous Access Journal delta resync operations
- XP Continuous Access Journal data volume pair status
- 3 XP Continuous Access Journal operations requirements and restrictions
- System requirements
- Requirements and restrictions for XP Continuous Access Journal
- Installing hardware
- Enabling XP Continuous Access Journal options
- Planning for journal volumes
- Configuring primary and secondary arrays for XP Continuous Access Journal operations
- Combining XP Continuous Access Journal with other data management functions
- Combining XP Continuous Access Journal with LUSE
- Combining XP Continuous Access Journal with Virtual LUN
- Combining XP Continuous Access Journal with XP Cache LUN
- Combining XP Continuous Access Journal with LUN Manager
- Combining XP Continuous Access Journal and XP Performance Control
- Combining XP Continuous Access Journal and XP Business Copy
- Combining XP Continuous Access Journal with XP Continuous Access (3DC cascading configuration)
- Combining XP Continuous Access Journal with XP Continuous Access Synchronous (3DC multi-target configuration)
- Hardware configurations
- Setup procedure
- Requirements for creating XP Continuous Access Journal pairs for delta resync operations
- Requirements for performing delta resync operations
- Recovering from primary site failures (prior to 50-08-xx firmware)
- Recovering from primary site failures via delta resync (50-08-xx or greater FW) (prior to 50-08-xx FW)
- Change to 3DC multi-target configuration after primary site failure
- Transfer tasks from XP Continuous Access secondary sites to primary sites (3DC cascade)
- Transfer tasks from XP Continuous Access secondary sites to primary sites (3DC multi-target)
- Transfer tasks-DC1 without jrnl pr to DC1 with jrnl pr (delta resync/3DC multi-target)
- Recovering from primary site and XP Continuous Access Synchronous secondary site failures
- Transferring business tasks from XP Continuous Access Journal secondary sites to primary sites
- Combining XP Continuous Access Journal and XP LUN Security Extension
- 4 Configuring arrays and logical paths
- Displaying the DKC Operation pane
- Configuring port attributes
- Associating primary and remote arrays and configuring logical paths (Add DKC)
- Changing options for logical paths and arrays
- Adding logical paths
- Deleting logical paths
- Viewing the status of logical paths
- Removing the relationship between primary and secondary arrays
- 5 Using journal groups
- Displaying the Journal Operation pane
- Registering journal volumes in journal groups
- Deleting journal volumes from journal groups
- Displaying detailed information about journal groups
- Changing options for journal groups
- Deleting journal groups
- Splitting mirrors (Pairsplit-r: suspending copy operations)
- Restoring mirrors (Pairresync: resuming copy operations)
- Deleting data volumes from mirrors (Pairsplit-S: ending copy operations)
- 6 Performing XP Continuous Access Journal pair operations
- Displaying the Pair Operation pane
- Creating a pair of data volumes (Paircreate)
- Displaying detailed information about a pair of data volumes
- Changing options for data volume pairs
- Splitting a pair of data volumes
- Restoring a pair of data volumes
- Deleting a pair of data volumes
- Creating a Point-in-Time copy of data volumes
- 7 Monitoring remote copy operations
- 8 Viewing history of data volume pair operations
- 9 Performing optional operations
- 10 Disaster recovery operations
- 11 XP Continuous Access Journal operations with NAS Blade
- Overview of XP Continuous Access Journal operations in NAS Blade systems
- Scope of XP Continuous Access Journal functions with NAS Blade
- Prerequisites
- Notes on operations
- Preparing for XP Continuous Access Journal operations
- Preparing for XP Continuous Access Journal volume pair operations
- Registration of public key used for SSH
- Configuring the XP RAID Manager environment
- Log in to the target NAS package using SSH
- Configure XP RAID Manager configuration definition files
- Adding the HORCM_DEV and HORCM_INST sections using the mkconf.sh command in XP RAID Manager
- Creating a template for an XP RAID Manager configuration definition file
- Editing the template for the XP RAID Manager configuration definition file
- Checking the contents of the XP RAID Manager configuration definition file
- Cascade configuration of XP Continuous Access Journal and XP Business Copy
- Setting the XP RAID Manager user environmental variable
- Settings for disaster recovery
- Create file systems in XP Continuous Access Journal P-VOLs
- Overview of XP Continuous Access Journal operations
- Operations of XP RAID Manager log files
- Commands
- Messages
- Notes on failures of external volumes
- 12 Troubleshooting
- 13 Power management for arrays and network relay devices
- 14 Pinned track recovery for XP Continuous Access Journal volumes
- 15 SIM reporting
- 16 Support and other resources
- Index