HP StorageWorks XP Remote Web Console Software - Manual (Page 63)

B Checking the WLM PAV Settings
To view or change the Workload Manager PAV settings:
1. On the WLM initial dialog box (see Figure 60 (page 63) ), press Enter to continue.
2. The Service Definition dialog box (see Figure 61 (page 63) ) allows you to define where the
service coefficient information can be found. Select option 1 (Read saved definition).
3. On the Primary Options dialog box (see Figure 62 (page 64) ), select option 8 (Service
Coefficients/Options) to display the WLM PAV settings.
4. The Service Coefficient/Service Definition Options dialog box (see Figure 63 (page 64) ) is
used to set PAV Dynamic Alias Management.
Figure 60 WLM Initial Dialog Box
Figure 61 WLM Choose Service Definition Dialog Box
63