HP StorageWorks XP Remote Web Console Software - Manual (Page 40)

40 LUN Manager for the XP128/XP1024
\
Figure 21 Change iSCSI Name & Nickname dialog box
If the selected WWN or iSCSI name is not registered in a host group, Figure 20 or Figure 21 is not
displayed.
3. Enter the WWN or iSCSI appropriate box, or select it from the list.
4. In the Nickname box, enter the new nickname.
5. If necessary, select the Apply this change to other ports, too check box.
If this check box is selected, the change will affect other ports. For example, if you select a host bus
adapter located beneath ports CL1-A and CL2-A in the tree, and you change the host bus adapter
name under port CL1-A, the host bus adapter will also be renamed under port CL2-A.
NOTE: The change in the pane will not affect any port that satisfies at least one of the following
conditions:
• LUN security is OFF.
• The resulting nickname is already used as the nickname of a host bus adapter connected to the
port.
• The resulting nickname is already used as the name of a host group (that is, a host storage
domain) in the port.
• The resulting WWN or iSCSI name exists in the port.
6. Click OK.
The changes you made are shown in blue. If you selected the Apply this change to other ports, too
check box, the Check WWNs (or Check iSCSI names) dialog box appears. To accept the changes to
the other ports, click OK.
Figure 22 Check WWNs / Check iSCSI names
7. Click Apply in the LUN Manager main pane. A confirmation message appears.
8. Click OK. The settings are applied to the disk array.