HP StorageWorks XP Remote Web Console Software - Manual (Page 32)

Figure 22 HP-UX Worldwide Name
Finding WWN for Solaris
HP currently supports the JNI Fibre Channel adapter in a Sun Solaris environment. This document
will be updated as needed to cover future adapter-specific information as those adapters are
supported. For further information on Fibre Channel adapter support, or if you are using a Fibre
Channel adapter other than JNI, contact HP technical support for instructions for finding the WWN.
To find the WWN in a Sun Solaris environment:
1. Verify that the fibre adapters and the Fibre Channel device drivers are installed.
2. Log in to the Sun Solaris host with root access.
3. Enter dmesg |grep Fibre to list the installed Fibre Channel devices and their WWNs (see
(page 33) ).
4. Verify that the Fibre Channel adapters listed are correct, and record the listed WWNs.
32 Performing LUN Manager Operations