HP StorageWorks XP Remote Web Console Software - Manual (Page 94)

Table 12 LUN Manager Spreadsheet Format (continued)
Function Tag
[LDEV] [LUN] [WWN] [HostGroup] [Port] [Cha] Column
Cmd Sec Cu Blank Option[0:31] Connection 5th
Blank Ldev Option[32:63] Channel speed 6th
Blank Blank Option[64:95] Blank 7th
Blank 8th
Blank 9th
Blank 10th
Ldkc Port Port Port Port Cha 11th
Cu Group Id Group Id Group Id Security Switch PcbMode 12th
Ldev LunId WWN Group Name AL-PA Blank 13th
Cmd Dev Ldkc Nickname Host Mode Fabric 14th
Cmd Sec Cu Blank Option[0:31] Connection 15th
Blank Ldev Option[32:63] Channel speed 16th
Blank Blank Option[64:95] Blank 17th
NOTE: When the LUN Manager spreadsheet is exported, the settings are written up to the 10th
column (blank column).
Setting the CHA Mode
Use the [CHA] tag to set the channel adapter mode. The [CHA] tag is available only for changing
settings. You cannot add or delete the settings with the [CHA] tag definitions.
Mainframe settings are not written on the exported spreadsheet. If you are using 8 Gbps settings,
you cannot set HighSpeed for the PCB mode. When you want to set the initiator/external mix
mode for the PCB mode, set HighSpeed just as when you set the high speed mode.
(page 94) lists the available configuration definitions for the [CHA] tag.
Table 13 Available Configuration Values for the [CHA] Tag
Available Values Item Column
One of the following can be set: Cha 1st, 11th (Index)
CHA-1AL,CHA-1AU,CHA-1BL,CHA-1BU,CHA-1EL,CHA-1EU,CHA-1FL,
CHA-1FU,CHA-1GL,CHA-1GU,CHA-1HL,CHA-1HU,CHA-1KL,CHA-1KU,
CHA-1LL,CHA-1LU,CHA-2ML,CHA-2MU,CHA-2NL,CHA-2NU,CHA-2QL,
CHA-2QU,CHA-2RL,CHA-2RU,CHA-2TL,CHA-2TU,CHA-2UL,CHA-2UU,
CHA-2WL,CHA-2WU,CHA-2XL,CHA-2XU
One of the following can be set: PcbMode 2nd, 12th
•
High Speed mode of 2 ports:
Standard: Standard mode (all ports)
HighSpeed: High Speed mode (all ports)
HighSpeed(Block-A): The upper two ports of the CHA are the High Speed
mode.
94 Performing LUN Manager Operations Using Configuration File Loader