HP StorageWorks XP Remote Web Console Software - Manual (Page 182)

NOTE:
You can select only LDEVs from the Volume Count list. You cannot select LUSE volumes.
Free LDEVs table
Displays the LDEVs, CVS volumes, or LUSE volumes selected in the Select an LDEV list that are eligible
to become part of a LUSE volume.
• LDEV: LDEV status icon ( Table 31 ) and CU and LDEV numbers. If the selected LDEV is a LUSE
volume, the LDEV number of the top LDEV in the LUSE volume appears.
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the
HP StorageWorks External Storage XP user guide.
NOTE:
If an LDEV number ends with V (for example, 00:01V), the LDEV is a virtual volume (V-VOL). For
more information about V-VOLs, see the
HP StorageWorks Snapshot XP user guide.
• RAID: LDEV's RAID level.
NOTE:
The RAID level is left unspecified with a hyphen (-) when the LDEV is an external LU or virtual
volume (V-VOL).
• PG: Combination of the disk group and parity group. If the LDEV extends over two or more parity
groups, the smaller parity group number appears.
NOTE:
If a parity group number starts with E (for example, E1-1), the parity group consists of one or
more external LUs.
NOTE:
If a parity group number starts with V (for example, V1-1), the parity group consists of one or
more virtual volumes (V-VOLs).
• CLPR: CLPR number and name. The CLPR number consists of two digits. The CLPR name consists
of up to six characters. For more information about cache logical partitions (CLPRs), see the HP
StorageWorks XP Disk/Cache Partition user guide.
• Selected LDEVs: Number of LDEVs selected in the Free LDEVs table.
Volume Manager operations 182