Case 5: sdevn and tdevn specified, ddsw = yes – HP StorageWorks XP Remote Web Console Software User Manual
Page 114
By executing the FCWITHDR command described in
, the relationship established with
Dataset 1 is not withdrawn because the specified extent in the device numbered 4202 is included
as a part of Dataset 1. See
Figure 74 FCWITHDR Command Processing (SDEVN and TDEVN Specified, DDSW = NO, XTNTLST
Specified) (for Example 4B)
an example of the command description that indicates that the extent specified by the
XTNTLST parameter is located in the center of Dataset 1, and the specified extent in the device
numbered 4202 is included as a part of Dataset 1. Therefore, the relation established with Dataset
1 is not withdrawn.
Figure 75 FCWITHDR Command Description (SDEVN and TDEVN Specified, DDSW = NO, XTNTLST
Specified) (Example 4C)
FCWITHDR SDEVN(X'4202') TDEVN(X'4203') XTNTLST(X'01000000' X'0100000E' X'21000000' X'2100000E'
Case 5: SDEVN and TDEVN Specified, DDSW = YES
All the relationships established with the extents in the source or target device specified by SDEVN
are withdrawn.
If the device specified by SDEVN is the source and if the relationships are set to the COPY mode,
the relationships are withdrawn after the background copy process is completed.
114
Performing Version 2 Operations