Cestpath, 31 typographic conventions for pprc tso commands – HP StorageWorks XP Remote Web Console Software User Manual
Page 149
TrueCopy for z/OS user guide 149
TC390A volumes on the XP128/XP1024/XP10000/XP12000.
on page 150 describes the
typographic conventions used for the PPRC TSO commands described in this section.
NOTE:
PPRC TSO command parameter support depends on the emulation (for example, 2105 or 3990).
PPRC command extensions are supported when running with 2105 emulation.
Use the PPRC TSO Command option on the Async Option window to select the XP256-compatible format
for PPRC TSO commands (groups 0-F instead of 00-3F).
NOTE:
The DEVSERV PATHS command displays the pair status of a TC390A volume in the DC-STATE box.
The contents of this box are the same as for TC390 Synchronous. Note that the TC390A transition states
(suspending and deleting) are not displayed.
This section does not specifically address the equivalent PPRCOPY ICKDSF commands. Use caution when
issuing ICKDSF commands to TC390A volumes.
CESTPATH
Use the CESTPATH command to establish remote copy paths for the XP128/XP1024/XP10000/XP12000
and can be used for either serial (ESCON) or Fibre Channel interface. For fibre, the RCU controller ID is
specified. The syntax for the CESTPATH command is:
For 3990-3, -6 and -6E controller emulations:
CESTPATH DEVN(X’dev#’) PRIM(X’ssid’ serial#) SEC(X’ssid’ serial#’) LINK(X’aabbccdd’)
For 2105 controller emulation (‘lss’ parameter for LCU no., CGROUP and RESETHP options):
CESTPATH DEVN(X’dev#’) PRIM(X’ssid’ serial# X’lss’) SEC(X’ssid’ serial#’ X’lss’) LINK(X’aabbccdd’)
[CGROUP(YES|NO) RESETHP(YES|NO)]
NOTE:
For fibre, do not use the RESETHP option. For serial, the RESETHP option rejects host I/O
operations. Before you use this option, stop the I/O operations from the host.
For 2105 emulation, use the CESTPATH CGROUP option to control freeze. Do not use the CGROUP
FREEZE option. If you use the FREEZE option, the CESTPATH command will be rejected.
Table 31
Typographic conventions for PPRC TSO commands
Typeface/Symbol
Example
Usage
Normal text
CRIT(YES)
Command/keyword names or console outputs.
Italics
ssid
Parameter to be replaced with an appropriate character or numeric
string.
Bold
cmd_param
Command/keyword names, parameters, or console outputs that
involve/denote special meaning for TC390A.
Square brackets
[PACE(15)]
Keywords/parameters that can be omitted.
Vertical pipe
(YES|NO)
List of keywords to be selected.
Underline
(YES|NO)
The default keywords/parameters.
Strikethrough
[QUIESCE]
Invalid keywords/parameters for TC390A.