HP StorageWorks XP Remote Web Console Software - Manual (Page 92)

Figure 33 Add RCU Operation − Fibre Channel Interface
Changing the RCU Options
The RCU Option dialog box (see Figure 34 (page 92) ) allows you to set the RCU options for the
connected MCU. The RCU options apply to all MCU CUs and to all RCUs connected to the MCU.
The RCU Option dialog box is presented during the add RCU process, and can also be opened
by right-clicking on the RCUs and clicking the RCU Operation > Change RCU Option command.
Figure 34 RCU Option Dialog Box
The Minimum Paths option allows you to specify the minimum number of paths required for each
RCU connected to the current MCU (default = 1). If the number of normal paths falls below this
92 Performing XP Continuous Access Configuration Operations