Troubleshooting lun security xp extension, Table 4 troubleshooting lun security xp extension, 4 troubleshooting lun security xp extension – HP StorageWorks XP Remote Web Console Software User Manual
Page 21: Viewing a list of, Logical volumes combined into a luse volume
LUN Security XP Extension user guide
21
4.
Select VMA, and select Set. The logical volume appears in blue and italics.
NOTE:
If you cannot select VMA, you cannot set VMA to the logical volume. Ensure that the
logical volume does not have an LU path. For more information about the conditions of the logical
volumes that you cannot set VMA, see ”
Using LUN Security XP Extension with other products
5.
To set VMA to other logical volumes, repeat
.
NOTE:
The settings have not been applied to the disk array. Therefore, you can cancel the
operation. To cancel the VMA setting operation, select VMA, and select Release, or click Cancel.
6.
Click Apply. A warning message appears asking if you want to continue the operation.
CAUTION:
To format a volume and set VMA to the volume, HP recommends that you prohibit
writing to the volume until you set VMA. When you set a VMA to a volume containing user data,
the user data cannot be read from the volume. To set VMA to a volume containing user data,
confirm that the volume does not contain user data that needs to be read.
7.
Click OK. A confirmation message appears.
8.
Click OK. The settings are applied to the disk array, and VMA is set to the logical volume.
NOTE:
To delete VMA, perform the LDEV Format operation. For more information, see the
HP StorageWorks LUN Configuration and Security Manager XP User Guide for the specific disk array.
Viewing a list of logical volumes combined into a LUSE volume
If logical volumes are combined into a LUSE volume, the LUN Security XP Extension pane does not display
all of the combined volumes, but displays only the top LDEV. The top LDEV is a logical volume whose LDEV
number is the smallest of all the logical volumes combined into a LUSE volume. For information about LUSE
volumes, see the HP StorageWorks LUN Configuration and Security Manger XP User Guide for the specific
disk array.
1.
From the LUN Security XP Extension pane, locate a LUSE volume by looking at the Type column of the
volume list. If an asterisk (*) and a number appear to the right of the emulation type, the volume is a
LUSE volume. For example, OPEN-V*3 indicates a LUSE volume consisting of three OPEN-V volumes.
2.
Right-click the LUSE volume, and select Volume Detail. The Volume Detail dialog box displays the
logical volumes combined into the selected LUSE volume.
3.
Click OK.
Troubleshooting LUN Security XP Extension
If an error occurs with LUN Security XP Extension, the Error Detail pane (
) displays error locations
and messages. The Error Detail pane does not include Command View XP or XP Remote Web Console
errors.
Table 4
Troubleshooting LUN Security XP Extension
Problem
Solution
You cannot find certain logical
volumes in the volume list of the
LUN Security XP Extension pane.
If logical volumes are combined into a LUSE volume, the volume list displays
only the top LDEV of the combined volumes. To view all logical volumes
combined into a LUSE volume, see ”