NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 962)

Table 195. Security features default settings (Continued)
Default Feature Name/Setting
Local Store
300 Write delay
Control, DHCPv6 Snooping, Global
Disabled DHCPv6 Snooping mode
Enabled MAC address validation
Control, DHCPv6 Snooping, Interface
Disabled Trust mode
Disabled Invalid packets
None Rate limit (pps)
N/A Burst interval (secs)
Control, DHCPv6 Snooping, Persistent
Local Store
300 Write delay
Control, IP Source Guard, Interface
Disabled IPSG mode
Disabled IPSG port security
Control, IPv6 Source Guard, Interface
Disabled IPv6SG mode
Disabled IPv6SG port security
Control, Dynamic ARP Inspection, Global
Disabled Validate source MAC
Disabled Validate destination MAC
Disabled Validate IP
Control, Dynamic ARP Inspection, VLAN
1 VLAN ID
Disabled Admin mode
Enabled Invalid packets
Disabled Static flag
Control, Dynamic ARP Inspection, Interface
Main User Manual 962 Software Default Settings and
Hardware Specifications
Fully Managed Switches M4350 Series Main User Manual