NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 215)

Table 53. LLDP-MED remote device information (Continued)
Description Field
The application type of the remote device, which can be one of the
following:
• unknown
• voice signaling
• guest voice
• guest voice signaling
• soft phone voice
• videoconferencing
• streaming video
• video signaling
Each application type that is received includes the VLAN ID, priority,
DSCP, tagged bit status, and unknown bit status. An interface can
receive one or many such application types.
This information is displayed only if a network policy TLV is received.
Media Application Type
The VLAN ID of the remote device. VLAN ID
The priority of the remote device. Priority
The DSCP of the remote device. DSCP
The unknown bit status of the remote device. Unknown Bit Status
The tagged bit status of the remote device. Tagged Bit Status
Inventory Information
Displays the inventory information that is received in LLDP-MED frames.
The hardware version of the remote device. Hardware Revision
The firmware version of the remote device. Firmware Revision
The software version of the remote device. Software Revision
The serial number of the remote device. Serial Number
The manufacturers name of the remote device. Manufacturer Name
The model name of the remote device. Model Name
The asset ID of the remote device. Asset ID
Location Information
Displays the location information that is received in LLDP-MED frames.
The type of location information of the remote device. Sub Type
The location information of the remote device. Location Information
Main User Manual 215 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual