NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 384)

Configure and display the Qav settings for
interfaces
You can configure and view the IEEE 802.1Qav settings for interfaces. The IEEE 802.1Qav
standard supports time-sensitive traffic streams by pacing all switch traffic, including
legacy asynchronous Ethernet traffic, through queuing and forwarding. When a talker
declares a stream, 802.1Qav identifies whether the stream is class A or class B and
specifies the stream’s bandwidth requirements. Class a traffic receives a higher
transmission priority than class B traffic.
You can configure and display the selected bandwidth allocations for class A and class
B traffic.
To configure and display the Qav settings for interfaces:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > MRP > Advanced > Qav Parameters.
The Qav Parameters page displays.
6. Select one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the interface.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the
heading row.
7. In the Class A MSRP Delta Bandwidth field, specify the additional bandwidth
represented as a percentage of the interface transmit rate that is reserved for class
A and class B traffic
Main User Manual 384 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual