Change the match criteria for a mac rule – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 800
If you select Enable, logging is enabled for this ACL rule (subject to resource
availability on the switch).
If the access list trap flag is also enabled, periodic traps are generated, indicating
the number of times the rule was evoked during the report interval, which is fixed
at five minutes.
22. In the Rate Limit Conform Data Rate field, specify the value of the conforming data
rate, which is the data rate at which confirming traffic is limited.
The range is from 1 to 4294967295 Kbps.
23. In the Rate Limit Burst Size field, specify the value of the burst size, which is the size
at which bursts of traffic above the confirming data rate are permitted.
The range is from 1 to 128 Kbps.
24. From the Time Range menu, as an option, select the name of the timer schedule.
For information about timer schedules, see Timer schedules on page 180.
The Rule Status field in the table shows if the rule is active or inactive. Blank means
that no timer schedule is associated with the rule.
25. Click the Add button.
The rule is added.
26. To save the settings to the running configuration, click the Save icon.
Change the match criteria for a MAC rule
You can change the match criteria for an existing MAC rule.
To change the match criteria for a MAC rule:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > ACL > Basic > MAC Rules.
Main User Manual
800
Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual