beautypg.com

Delete one or all dynamic dhcp bindings – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 135

background image

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select System > Services > DHCP Server > DHCP Bindings Information.

The DHCP Bindings Information page displays. The table displays information about
all bindings.

6. To search for a binding by IP address, enter the IP address in the Search Binding

IP field and click the Go button.

Information about the binding displays.

The following table describes the view-only fields on the page.

Table 34. DHCP bindings information

Description

Field

The client’s IP address

IP Address

The name of the pool that the client is part of

Pool Name

The client’s hardware address

Hardware Address

The remaining lease time in days, hours and minutes (dd:hh:mm format)

Lease Time Left

The type of binding (Dynamic or Manual)

Type

Delete one or all dynamic DHCP bindings

To delete one or all dynamic DHCP bindings:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

Main User Manual

135

Configure Switch System
Information

Fully Managed Switches M4350 Series Main User Manual