NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 853)

• Error: Level 3, a device error occurred, such as a port being offline. This is the
default setting.
• Warning: Level 4, the lowest level of a device warning.
• Notice: Level 5, provides the network administrators with device information.
• Informational: Level 6, provides device information.
• Debug: Level 7, provides detailed information about the log.
NOTE: A log records messages equal to or above a configured severity
threshold.
8. Click the Apply button.
Your settings are saved.
9. To save the settings to the running configuration, click the Save icon.
Syslog and log server host settings
You can let the switch send log messages to one or more servers, that is, to remote
logging hosts. A remote log server is the same as a remote syslog host.
You must enable the server log on the switch and specify one or more remote syslog
host.
Configure the syslog settings
To configure the syslog settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
Main User Manual 853 Monitor the Switch and Network
Fully Managed Switches M4350 Series Main User Manual