NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 905)

8. In the Max TTL field, enter the maximum time to live (TTL) for the destination.
The default value is 30. The range is from 1 to 255.
9. In the Init TTL field, enter the initial TTL to be used.
The default value is 1. The range is from 1 to 255.
10. In the MaxFail field, enter the maximum number of failures allowed in the session.
The default value is 5. The range is from 1 to 255.
11. In the Interval (secs) field, enter the time between probes in seconds.
The default value is 3. The range is from 1 to 60.
12. In the Port field, enter the UDP destination port for the probe packets.
The default value is 33434. The range is from 1 to 65535.
13. In the Size field, enter the size of the probe packets.
The default value is 0. The range is from 0 to 39936.
14. From the Source menu, as an option, you can select the IP address or interface that
must be used to send probe packets:
• None: The source address of the probe packet is the address of the default egress
interface.
• IPv6 Address: The source IP address that must be used when echo request
packets are sent. With this selection, the IPv6 Address field displays and you
must enter the IPv6 address that must be used as the source.
• Interface: The interface that must be used when echo request packets are sent.
The Interface menu displays, and you must select the interface.
15. Click the Apply button.
A traceroute request is sent to the specified IP address or host name. The results are
displayed below the configurable data in the Results field.
Capture Packets
You can capture and store packets on a USB storage device.
To initiate packet capturing:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
Main User Manual 905 Maintenance and
Troubleshooting
Fully Managed Switches M4350 Series Main User Manual