NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 645)

Remove a RADIUS accounting server from the switch
If you no longer need a RADIUS accounting server, you can remove it from the switch.
To remove a RADIUS accounting server from the switch:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Management Security > RADIUS > Accounting Server
Configuration.
The Accounting Server Configuration page displays.
6. Select the check box next to the server IP address.
7. Click the Delete button.
Your settings are saved. The RADIUS accounting server is removed.
8. To save the settings to the running configuration, click the Save icon.
TACACS+ servers
TACACS+ provides a centralized user management system, while still retaining
consistency with RADIUS and other authentication processes. TACACS+ provides the
following services:
• Authentication: Provides authentication during login and through user names and
user-defined passwords.
• Authorization: Performed at login. When the authentication session is completed,
an authorization session starts using the authenticated user name. The TACACS+
server checks the user privileges.
Main User Manual 645 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual