NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 242
-
1: If no switch stack is configured, the physical interfaces for the switch are
displayed.
-
Unit ID for a stacked switch: If a switch stack is configured, the physical
interfaces for the switch with the selected stack unit ID are displayed.
•
LAG: Only LAGs are displayed.
•
All: Both physical interfaces and LAGs are displayed, or for a switch stack, both
physical interfaces on all switches in the stack and LAGs are displayed.
7. Select one or more interfaces by taking one of the following actions:
•
To configure a single interface, select the check box associated with the interface,
or type the interface number in the Go To Interface field and click the Go button.
•
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
•
To configure all interfaces with the same settings, select the check box in the
heading row.
8. In the PVID field, specify the VLAN ID to assign to untagged or priority-tagged frames
received on this interface.
The default is 1.
9. In the VLAN Member field, specify the VLAN ID or list of VLANs of a member
interface.
VLAN IDs range from 1 to 4093. The default is 1. Use a hyphen (-) to specify a range
or a comma (,) to separate VLAN IDs in a list. Spaces and zeros are not permitted.
10. In the VLAN Tag field, specify the VLAN ID or list of VLANs of a tagged interface.
VLAN IDs range from 1 to 4093. Use a hyphen (-) to specify a range or a comma (,)
to separate VLAN IDs in a list. Spaces and zeros are not permitted. To reset the VLAN
tag configuration to the defaults, use the None keyword. Port tagging for the VLAN
can be set only if the interface is a member of this VLAN.
11. From the Acceptable Frame Types menu, select the types of frames that can be
received on the interface:
•
VLAN only: Untagged frames and priority-tagged frames received on the interface
are discarded. VLAN-tagged frames are forwarded in accordance to the 802.1Q
VLAN specification.
•
Admit All: Untagged frames and priority-tagged frames received on the interface
are accepted and assigned the value of the port VLAN ID for the interface.
VLAN-tagged frames are forwarded in accordance to the 802.1Q VLAN
specification.
•
Admit Untagged Only: Untagged frames received on the interface are accepted.
VLAN-tagged frames are forwarded in accordance to the 802.1Q VLAN
specification.
Main User Manual
242
Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual