NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 443)

mask, indicating which bits in the route's destination mask are significant for the
filtering operation.
10. Click the Apply button.
Your settings are saved.
11. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 116. RIP route redistribution summary information
Description Field
The type of source route to be redistributed by RIP:
• Connected
• Static
• OSPF
Source Protocol
Indicates if the route for a source protocol is redistributed. By default,
route distribution is disabled. Redistribute Mode
The metric of redistributed routes for the source route. The field displays
0 if the metric is not configured. Metric
The access list that filters the routes to be redistributed by the destination
protocol. The field displays 0 if no ACL is configured for this purpose. Distribute List
Indicates if an internal OSPF route is redistributed. By default, this option
is enabled. Match Internal
Indicates if an external type 1 OSPF route is redistributed. By default, this
option is disabled. Match External Type 1
Indicates if an external type 2 OSPF route is redistributed. By default, this
option is disabled. Match External Type 2
Indicates if an NSSA type 1 OSPF route is redistributed. By default, this
option is disabled. Match NSSA External Type 1
Indicates if an NSSA type 2 OSPF route is redistributed. By default, this
option is disabled. Match NSSA External Type 2
Router discovery and router
advertisements
By default, a routing interface does not send router advertisements.You can enable the
router advertisements for a routing interface and configure the setting for the router
advertisements.
Main User Manual 443 Manage Routing
Fully Managed Switches M4350 Series Main User Manual