NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 588)

To map 802.1p priorities to queues for all interfaces or individual interfaces:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select QoS > CoS > Advanced > 802.1p Queue Mapping.
The 802.1p Queue Mapping page displays.
6. From the Interface menu, either select All to apply the mapping to all interfaces or
select an individual interface.
7. In the 802.1p to Queue Mapping table, map each of the eight 802.1p priorities to
a queue (internal traffic class) from 0 to 6.
The 802.1p Priority row contains traffic class selectors for each of the eight 802.1p
priorities to be mapped. The priority goes from low (0) to high (7). For example,
traffic with a priority of 0 is for most data traffic and is sent using best effort. Traffic
with a higher priority, such as 7, might be time-sensitive traffic, such as voice or video.
Table 146. Default values for 802.1p to queue mapping
7 6 5 4 3 2 1 0 802.1p priority
3 3 2 2 1 0 0 1 Default queue
The values in the menu under each priority represent the traffic class. The traffic class
is the hardware queue for a port. Higher traffic class values indicate a higher queue
position. Before traffic in a lower queue is sent, it must wait for traffic in higher queues
to be sent.
8. Click the Apply button.
Your settings are saved.
9. To save the settings to the running configuration, click the Save icon.
Main User Manual 588 Configure Quality of Service
Fully Managed Switches M4350 Series Main User Manual