NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 65)

4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Scroll down to the Temperature Status section.
6. To refresh the page, click the Refresh button.
The following table describes the temperature status view-only fields.
Table 6. Temperature status information
Description Field
The unit ID of the switch in which the sensor is installed. Unit ID
The ID of the sensor. Sensor
The description of the sensor. Description
The temperature of the sensor in Celsius. Temperature (C)
The state of the sensor, which should be Normal. State
The maximum supported operating temperature in Celsius. Max Temp (C)
View the device status and firmware version
You can view the device status and firmware version.
To view the device status and firmware version:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
Main User Manual 65 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual