NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 889)

• None: Verification of the downloaded file is disabled. This is the default setting.
• Verify: The digital signature of the downloaded file is verified.
• No Verify: The digital signature of the downloaded file is not verified.
9. If the selection from the File Type menu is Application, the Application File Name
field displays and you must specify the application file name.
10. From the Transfer Mode menu, specify the protocol that must be used to transfer
the file to the server:
• TFTP: Trivial File Transfer Protocol.
• SFTP: Secure File Transfer Protocol. This selection requires you to specify a user
name and password.
• SCP: Secure Copy Protocol. This selection requires you to specify a user name
and password.
• FTP: File Transfer Protocol. This selection requires you to specify a user name
and password.
11. From the Server Address Type menu, select the format for the Server Address
field:
• IPv4: Indicates that the server address is an IPv6 address in dotted-decimal
format. This is the default setting.
• IPv6: Indicates that the server address is an IPv6 address in hexadecimal numbers
using 16-bit values between colons.
• DNS: Indicates that the server address is a host name.
12. In the Server Address field, enter the IP address of the server in accordance with
the format indicated by the server address type.
The default is the IPv4 address 0.0.0.0.
13. In the Remote File Path field, specify the path on the server where the file is located.
The path name can include alphabetic, numeric, forward slash, dot, or underscore
characters only. You can enter up to 160 characters.
14. In the Remote File Name field, specify the file name for the file to be downloaded.
You can enter up to 32 characters.
15. If you select SFTP, SCP, or FTP from Transfer Mode menu, specify the following
settings:
• User Name: Specify the user name for remote login to the server.
• Password: Specify the password for remote login to the server.
16. Click the Apply button.
Main User Manual 889 Maintenance and
Troubleshooting
Fully Managed Switches M4350 Series Main User Manual