Display the msrp reservation settings – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 382
Table 96. MSRP statistics information (Continued)
Description
Field
The number of MSRP frames that the switch did not transmit.
Transmission Failures
The number of MSRP messages that were not added to the queue.
Message Failures
MSRP Statistics
The interface for which information is displayed.
Interface
The number of MSRP frames that were received the interface.
Frames Received
The number of MSRP frames with bad header that were received on the
interface.
Bad Header
The number of MSRP frames with bad PDUs body format that were received
on the interface.
Bad Format
The number of MSRP frames that transmitted on the interface.
Frames Transmitted
The number of MSRP frames that the interface failed to transmit.
Transmission Failures
The number of MSRP frames that failed to register on a device or particular
interface.
Registration Failures
Display the MSRP reservation settings
You can display information about the talker, listener, and intermediate device status
for the devices involved in each MSRP stream that flows through the switch.
To display the MSRP reservation settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > MRP > Advanced > MSRP Reservation Parameters.
Main User Manual
382
Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual