NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 218)

the list go down, all downstream interfaces in the list are either brought down or brought
up, depending on the action that you configure for the link dependency group.
After you configure the link dependency group, configure the upstream and downstream
interfaces for the group (see Configure or display upstream and downstream interfaces
for a link dependency group on page 219).
To configure a link dependency group:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Link Dependency > Link Dependency Group Configuration.
The Link Dependency Group Configuration page displays.
6. Select one or more check boxes for the group IDs.
The switch supports 16 group IDs.
NOTE: The group IDs are not associated with interface numbers.
7. From the Link Action menu, specify the following actions that must occur on the
downstream interfaces in the group when all upstream interfaces in the group are
down:
• Link Down: When all upstream interfaces in the group are down, all downstream
interfaces in the group are brought down too. When any of the upstream interfaces
in the group are up, all downstream interfaces in the group are brought up too.
• Link Up: When all upstream interfaces in the group are down, all downstream
interfaces in the group are brought up. When any of the upstream interfaces in
the group are up, all downstream interfaces in the group are brought down.
8. Click the Apply button.
Main User Manual 218 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual