NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 647)

Depending on the configuration of your switch, the following options can display:
• Another VLAN ID: The primary IP address of a VLAN other than VLAN 1 is used
as the source address.
• Routing interface: The primary IP address of a routing interface is used as the
source address.
• Routing VLAN: The primary IP address of a VLAN routing interface is used as
the source address.
• Routing loopback interface: The primary IP address of a routing loopback
interface is used as the source address.
• Different: For some features, Different can display. This means that the source
interface is configured separately.
9. Click the Apply button.
Your settings are saved.
10. To save the settings to the running configuration, click the Save icon.
Add a TACACS+ server to the switch
You can add up to five TACACS+ servers with which the switch can communicate.
To add a TACACS+ server to the switch:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Management Security > TACACS > TACACS+ Server
Configuration.
The TACACS+ Server Configuration page displays.
6. In the TACACS+ Server field, enter the TACACS+ server IP address.
Main User Manual 647 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual