NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 954)

Table 193. Routing, OSPF, OSPFv3, and multicast features default settings (Continued)
Default Feature Name/Setting
Multicast IPv6, MLD, Routing Interface
Disabled Admin mode
V2 Version
125 Query interval
10000 Query maximum response time
31 Startup query interval
2 Startup query count
1000 Last member query interval
2 Last member query count
Multicast IPv6, MLD, Proxy Interface
Disabled Admin mode
1 Unsolicited report interval
QoS features default settings
The following table describes the default settings for the QoS features that you can
configure.
(View-only settings are not included in the table but might be included in the data sheet,
which you can download by visiting netgear.com/support/download/.)
Table 194. QoS features default settings
Default Feature Name/Setting
CoS, Global
trust IP-DSCP applied to all interfaces Global trust mode
CoS, 802.1p Queue Mapping
Main User Manual 954 Software Default Settings and
Hardware Specifications
Fully Managed Switches M4350 Series Main User Manual