Configure an ospfv3 interface – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 499
6. In the Area ID field, enter an OSPFv3 area ID.
An area ID is a 32-bit integer in dotted-decimal format that identifies the area to
which a switch interface connects.
7. In the IPv6 Prefix field, enter the IPv6 address and prefix for the selected area.
8. From the LSDB Type menu, select the type of link state advertisements (LSAs) that
must be associated with the area ID and address range.
•
Network Summary: The switch generates Network Summary LSAs (Type 3 LSAs)
for the area. This is the default setting.
•
NSSA External: The switch generates NSSA External LSAs (Type 7 LSAs) for the
area. These types of LSAs provide more information.
9. From the Advertise menu, select if the address range is advertised outside the area:
•
Enable: The address range is advertised outside the area through Network
Summary LSAs. This is the default setting.
•
Disable: The address range is not advertised outside the area.
10. Click the Add button.
The OSPFv3 area ID and range is added.
11. To save the settings to the running configuration, click the Save icon.
Configure an OSPFv3 interface
You can configure one or more OSPFv3 interfaces, which are interfaces that are
connected to OSPFv3 areas over point-to-point or broadcast connections.
To configure an OSPFv3 interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
Main User Manual
499
Configure OSPF and OSPFv3
Fully Managed Switches M4350 Series Main User Manual