NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 798)

5. Select Security > ACL > Basic > MAC Rules.
6. From the ACL Name menu, select the MAC ACL.
7. In the Sequence Number field, enter a whole number in the range from 1 to
2147483647 to identify the rule.
8. From the Action menu, select the action that must be taken if a packet matches the
rule’s criteria:
• Permit: Forwards packets that meet the ACL criteria.
• Deny: Drops packets that meet the ACL criteria.
9. In the Assign Queue ID field, specify the hardware egress queue identifier that must
be used to handle all packets matching this ACL rule.
The range for the queue ID is from 0 to 6.
10. From the Mirror Interface menu, select the specific egress interface to which the
matching traffic stream must be copied, in addition to being forwarded normally by
the switch.
This field cannot be set if a redirect interface is already configured for the ACL rule.
This field is visible for a Permit action.
11. From the Redirect Interface menu, select the egress interface to which the matching
traffic stream must be redirected, bypassing any forwarding decision normally
performed by the switch.
This field cannot be set if a mirror interface is already configured for the ACL rule.
12. From the Match Every menu, select whether each Layer 2 MAC packet must be
matched against the rule:
• True: Each packet must match the selected ACL rule.
• False: Not all packets need to match the selected ACL rule.
13. In the CoS field, specify the 802.1p priority that must be compared against the
information in an Ethernet frame.
The range for the priority is from 0 to 7.
14. In the Destination MAC field, specify the destination MAC address that must be
compared against the information in an Ethernet frame.
The format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a
destination MAC address of 01:80:C2:xx:xx:xx.
Main User Manual 798 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual