Display the lldp-med remote device information – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 213
Table 52. LLDP-MED local device information (Continued)
Description
Field
Inventory Information
Displays if an inventory TLV is present in LLDP-MED frames that are transmitted.
The hardware version that is transmitted.
Hardware Revision
The firmware version that is transmitted.
Firmware Revision
The software version that is transmitted.
Software Revision
The serial number that is transmitted.
Serial Number
The manufacturers name that is transmitted.
Manufacturer Name
The model name that is transmitted.
Model Name
The asset ID that is transmitted.
Asset ID
Location Information
Displays if a location TLV is present in LLDP-MED frames that are transmitted.
The type of location information that is transmitted.
Sub Type
The location information that is transmitted.
Location Information
Extended PoE
Displays if PoE device information is present in LLDP-MED frames that are transmitted.
The type of PoE device that is transmitted. The switch can supply PoE, so
it is a power sourcing equipment (PSE).
Device Type
The type of power source that is transmitted.
Power Source
The type of power priority that is transmitted.
Power Priority
The power in watts that is transmitted, that is, the information is
transmitted, not the actual power.
Power Value
Display the LLDP-MED remote device
information
You can display LLDP-MED remote device information, which is information that the
device that is connected to an interface advertises.
To display the LLDP-MED remote device information:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
Main User Manual
213
Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual