NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 695)

17. In the Supplicant Timeout field, enter the period in second after which the interface
times out the supplicant.
Enter a value in the range from 0 to 65535. The default is 30 seconds.
18. In the Server Timeout field, enter the period after which the interface times out the
authentication server.
Enter a value in the range from 0 to 65535. The default is 30 seconds.
19. In the Maximum Requests field, enter the maximum number of times that the
interface sends an EAPOL EAP request/identity to the supplicant before timing out
the supplicant.
Enter a value in the range from 1 to 10. The default is 2.
20. From the PAE Capabilities menu, select Authenticator or Supplicant to specify
the function of the port access entity (PAE).
The default is Authenticator.
21. From the Periodic Reauthentication menu, select to enable or disable the periodic
reauthentication option of the supplicant.
The default is Disable.
22. If you enable the periodic reauthentication option, in the Reauthentication Period
field, enter the period in seconds after which the supplicant must be reauthenticated.
Enter a value in the range from 0 to 65535. The default is 3600 seconds.
23. From the User Privileges menu, select admin or guest to limit the type of users that
can be granted access.
By default, both admin and guest users can be granted access.
24. In the Max Users field, enter the maximum number of supplicants that the interface
can support.
The default is 48.
25. In the Authentication Order columns, enter the order in which authentication must
occur for up to three methods:
• Method 1: The default selection is DOT1X. The other options are MAB, and
CAPTIVE PORTAL. You cannot disable Method 1.
• Method 2: The default selection is MAB. The other options are None, DOT1X,
and CAPTIVE PORTAL. Disable Method 2 by selecting None.
• Method 3: The default selection is CAPTIVE PORTAL. The other options are
None, DOT1X, and MAB. Disable Method 3 by selecting None.
As an example, if a client tries 802.1X authentication (based on the user and client
credentials) and authentication fails, the interface proceeds with MAB authentication.
If that method fails too, the interface proceeds with captive portal authentication. If
that method fails too, the client cannot be authenticated.
Main User Manual 695 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual