NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 118)

The range is from 8 to 65535 seconds. The default is 17 seconds.
11. Click the Apply button.
Your settings are saved.
12. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 27. Green Ethernet local device information
Description Field
The cumulative energy saved on the port because of the green modes
that are enabled on the port in watts * hours. Cumulative Energy Saved on this
port due to Green mode(s) (Watts
* Hours)
The operational state (Active or Inactive) of the Energy Detect mode. Energy Detect Operational Status
The reason for the operational state that is displayed in the previous field. Reason
The value of ‘Tw_sys’ that the port can support. Tw_sys_tx (uSec)
The link partner’s ‘transmit Tw_sys’ that the port uses to compute the
‘Tw_sys’ that it requests from its link partner. Tw_sys_tx Echo (uSec)
The value of ‘Tw_sys’ that the port requested from its link partner. Tw_sys_rx (uSec)
The link partner’s ‘receive Tw_sys’ that the port uses to compute the
‘Tw_sys’ that it can support. Tw_sys_rx Echo (uSec)
The value of the ‘fallback Tw_sys’ that the port requested from its link
partner. Fallback Tw_sys (uSec)
The initialization status of the transmit EEE transmit Data Link Layer (DLL)
function on the port. Tx_dll_enabled
The transmit DLL status, which indicates if the ‘tx system’ initialization is
complete and if port is ready to receive or update LLDPDUs that contain
EEE TLVs. Tx_dll_ready
The status of the EEE capability negotiation on the port. Rx_dll_enabled
The receive DLL status, which indicates if the ‘rx system’ initialization is
complete and if port is ready to receive or update LLDPDUs that contain
EEE TLVs. Rx_dll_ready
The time since the counters were reset. Time Since Counters Last Cleared
Display green Ethernet information for the
link partner of an interface
The switch can detect green Ethernet information for the link partner of an interface,
that is for the remote device.
Main User Manual 118 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual