View the ospfv3 link state database – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 507
(Continued)
Description
Field
The number of times this neighbor relationship changed state, or an error occurred.
Events
An integer representing the current length of the retransmission queue of the specified
neighbor router ID of the specified interface.
Retransmission Queue
Length
View the OSPFv3 link state database
If OSPFv3 is enabled, you can view the OSPFv3 link state database.
To view the OSPFv3 link state database:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > OSPFv3 > Advanced > Link State Database.
The page displays the OSPFv3 Link State Database and OSPFv3 External LSDB Table
sections.
The term LSDB stands for Link State Database.
6. To refresh the page, click the Refresh button.
The following tables describe the view-only fields on the page.
Main User Manual
507
Configure OSPF and OSPFv3
Fully Managed Switches M4350 Series Main User Manual