NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 209)

• Extended and automated power management of Power over Ethernet endpoints.
• Inventory management, which lets you track your network devices and determine
their characteristics, such as manufacturer, software and hardware versions, and
serial or asset numbers.
Configure the global LLDP-MED settings
You can specify LLDP-MED settings that are globally applied to the switch.
To configure the global LLDP-MED settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > LLDP > LLDP-MED > Global Configuration.
The Global Configuration page displays.
6. In the Fast Start Repeat Count field, enter the number of LLDP PDUs that are
transmitted when the protocol is enabled.
The range is from (1 to 10). Default value of fast repeat count is 3.
The Device Class field displays the switch MED classification. The switch is a Network
connectivity device.
The following four types of MED devices exist, of which the first three are endpoints:
• Class I: Generic devices, which include IP communication controllers.
• Class II: Media devices, which include conference bridges.
• Class III: Communication devices, which include IP telephones.
• Class IV: Network connectivity devices, which include LAN switches, routers,
IEEE 802.1 bridges, and IEEE 802.11 WiFi access points.
7. Click the Apply button.
Main User Manual 209 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual