NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 644
Table 158. RADIUS accounting server statistics information (Continued)
Description
Field
The number of RADIUS packets of unknown type that were received from
this server on the accounting port
Unknown Types
The number of RADIUS packets that were received from this server on the
accounting port and dropped for some other reason
Packets Dropped
Modify the settings for a RADIUS accounting server on
the switch
You can modify the settings for a RADIUS accounting server on the switch.
To modify the settings for a RADIUS accounting server on the switch:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Management Security > RADIUS > Accounting Server
Configuration.
The Accounting Server Configuration page displays.
6. Select the check box next to the server IP address.
7. Modify the configuration for the accounting server.
8. Click the Apply button.
Your settings are saved.
9. To save the settings to the running configuration, click the Save icon.
Main User Manual
644
Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual