NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 546)

12. In the DR Priority field, specify the designated router (DR) priority for the interface.
The range is from 0 to 2147483647. The default is 1.
13. Click the Apply button.
Your settings are saved.
14. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only field on the page.
Table 132. IPv4 PIM interface configuration information
Description Field
The state of PIM on the interface (Operational or Non-Operational). Protocol State
The IPv4 address of the PIM interface. IP Address
The IPv4 address of the designated router on the PIM interface. Designated Router
The number of PIM neighbors on the PIM interface. Neighbor Count
Display IPv4 PIM neighbors and search the
PIM neighbor database
You can display the IPv4 PIM neighbor information and search the PIM neighbors
database by interface or by neighbor IP address.
To display IPv4 PIM neighbors and search the PIM neighbors database:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > Multicast > PIM > PIM Neighbor.
The PIM Neighbor page displays.
Main User Manual 546 Configure Multicast Routing
Fully Managed Switches M4350 Series Main User Manual