NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 132)

• ASCII: Enter the information in the Option Value field in ASCII format.
• Hex: Enter the information in the Option Value field in hexadecimal format. The
possible formats are xx:xx and xxxx.xxxx.
• IP Address: In the Option Value field, enter an IPv4 address.
9. In the Option Value field, specify the option value for the pool according to your
selection in the previous step.
10. Click the Add button.
The option code is added for the pool.
11. To save the settings to the running configuration, click the Save icon.
Bind a DHCP pool to a class and configure
the binding
If you set up DHCP pools and classes for use with a DHCP relay, you can bind a pool to
one or more classes and configure the bindings.
A binding configuration specifies the IP address ranges to which the binding applies,
whether a DHCP address request is accepted or denied, and, as an option, the file path
to a boot file that a client must download form a TFTP server in the network (this is
referred to as Option Code 67).
To bind a DHCP pool to a class and configure the binding:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Services > DHCP Server > DHCP Class Binding Configuration.
The DHCP Class Binding Configuration page displays. The page shows different
sections.
Main User Manual 132 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual