NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 173
•
PoE+ (802.3at) ports: The range is from 3.0W to 30.0W.
•
802.3bt-Type3 ports (which is a selection from the Power Mode menu for
PoE++ models only): The range is from 3.0W to 60.0W.
•
PoE++ (802.3bt) ports (PoE++ models only): The range is from 3.0W to 99.9W.
13. From the Detection Type menu, select how the port detects the attached PD:
•
IEEE 802: The port performs a 4-point resistive detection. This is the default
setting.
•
4pt 802.3af + Legacy: The port performs a 4-point resistive detection, and if
required, continues with legacy detection.
•
Legacy: The port performs legacy detection.
14. From the Timer Schedule menu, select a timer schedule or select None, which is
the default selection.
For information about setting up and configuring PoE timer schedules, see Timer
schedules on page 180.
15. Click the Apply button.
Your settings are saved.
16. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 44. PoE port information
Description
Field
All ports supports high power mode.
High Power
The maximum power in Watts that can be provided by the port.
Max Power (W)
The class defines the range of power that a powered device (PD) is
drawing from the switch. The class definitions are as follows:
• 0: 0.44W–15.8W
• 1: 0.44W–3.84W
• 2: 3.84W–7.2W
• 3: 6.49W–15.9W
• 4: 12.95W–30.8W
• 5: 25.5W–47.0W (PoE++ models only)
• 6: 51.0W–64.4W (PoE++ models only)
• 7: 62.0W–81.1W (PoE++ models only)
• 8: 71.0W–96.5W (PoE++ models only)
• Unknown: The class cannot be detected, or no PD is attached to the
port.
Class
The voltage that is delivered to the PD in volts.
Output Voltage (Volts)
Main User Manual
173
Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual