NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 175)

4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > PoE > Advanced > PoE Port Configuration.
The PoE Port Configuration page displays.
6. Select one or more ports by taking one of the following actions:
• To power-cycle a single port, select the check box associated with the port, or
type the port number in the Go To Interface field and click the Go button.
• To power-cycle multiple ports with the same settings, select the check box
associated with each port.
• To power-cycle all ports with the same settings, select the check box in the
heading row.
7. Click the Power-Cycle Port(s) button.
The ports are power-cycled.
Manage the PoE usage threshold
If your model provides power supply unit (PSU) bays (also referred to as slots), you can
install one or more auxiliary power supplies (APSs) to expand PoE power or enable N+1
power redundancy (see Manage N+1 power redundancy on page 177). Depending on
the number of PSU bays, you can also do both, that is, expand PoE power
and enable
N+1 power redundancy.
The PoE usage threshold applies to the switch, that is, to the internal power supply and
any optional APSs that are installed.
To manage the PoE usage threshold for the switch:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
Main User Manual 175 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual