Display or clear isdp statistics – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 226
Table 57. ISDP neighbor information (Continued)
Description
Field
The capability of the neighbor, which can be one of the following:
• Router
• Trans Bridge
• Source Route
• Switch
• Host
• IGMP
• Repeater
Capability
The model type of the neighbor.
Platform
The port ID on the neighbor.
Port ID
The hold time for ISDP packets that the neighbor transmits.
Hold Time
The ISDP version sending from the neighbor.
Advertisement Version
The time since the last entry was changed.
Entry Last Changed Time
The software version on the neighbor.
Software Version
Display or clear ISDP statistics
You can display or clear the ISDP statistics.
To display or clear ISDP statistics:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > ISDP > Advanced > Statistics.
Main User Manual
226
Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual